Microcurrent Facial Toning Device

The EMS Microcurrent Facial Toning Device is a premium quality, slimline microcurrent device which features 3 intensity levels of microcurrent and warm heat energy mode.

It can also be used as a facial massager with warm or cold modes. Designed with quality 360 degree rotating spheres for optimal treatments.

The EMS Microcurrent Facial Toning Device, encourages firmer, tighter looking skin and helps reduce the appearance of fine lines and wrinkles.

With twin zinc alloy 3D roller balls, both warm and cold massage modes and 3 microcurrent intensity levels, it is one of the leading at home use EMS microcurrent toning devices available in the UK.

What are the Benefits of the EMS Microcurrent Facial Toning Device?

As the low voltage electrical pulses stimulate your facial muscles, they create a more toned and uplifted appearance, it's just like a sculpting gym workout for your face.

The benefits can be felt relatively quickly and are cumulative. This is why many people keep using the EMS Microcurrent Facial Toning Device as part of their regular routine.

This is not the only reason to use the EMS microcurrent device, microcurrent’s main benefits go far beyond that of just a lift. Microcurrent also boosts circulation, enhances penetration of skincare products, and stimulates collagen and elastin production.

What is EMS Microcurrent Technology?

Microcurrent beauty technology devices use low-grade electrical impulses (low voltage electrical current) to stimulate the muscles in the face and neck area. EMS (electrical muscle stimulation) provides the deeper muscle stimulation and exercises the facial muscles by contracting them. 

How Does the EMS Microcurrent Facing Toning Device Work?

The low voltage electrical current runs between the positive and negatively charged roller balls. When both are in contact with your skin with a conductive gel, the current flows through the muscles, training them to tone up. So, they don't actually work on the skin, but rather the muscle beneath the skin.

The Microcurrent EMS functions go deep into the muscle layer to activate muscle  movement and stimulate contraction to achieve a tightening effect, helping to reduce the appearance of fine lines and wrinkles. 

Does microcurrent hurt? Microcurrent isn't a painful experience, the toning device uses a lower electrical charge, so you shouldn't feel any discomfort at all.

How to Use the EMS Microcurrent Facial Toning Device

Using the EMS microcurrent device is easy, just clean and dry your skin, then apply the conductive gel to the jawline, cheek, neck and forehead.

Our Pure Aloe Vera Gel can be used as a water-based conductive gel and a free 30ml bottle is included with each EMS Microcurrent Toning Device purchase.

Pick your mode and intensity, following the user manual guidelines, then place the device on the skin, making sure to apply a slight pressure to ensure full contact between the twin rollers and the skin. Move the device using a very slow linear motion across your skin in the chosen area. Repeat on each area as required.

Start off slowly with the lowest energy intensity and work up from there.

Once you're done, remove the gel, unless it's a designated leave on treatment suitable for use with and after microcurrent device use.

Warm Massage Mode can be used to help with the absorption of your favourite serums creams. 

Cold Massage Mode reduces puffiness and increases lymphatic drainage in the area treated.

Results are cumulative and it is recommended to use the EMS microcurrent toning device regularly, with the frequency and duration dependant on the energy intensity level or mode being used.

This face lifting tool, helps repair damaged skin, stimulating collagen production, reducing signs of ageing.

Pure Derma's microcurrent facial toning device is a must have simple to use hand held at home skin care device, it is a great travel accessory. 

Please note, the effects of the microcurrent devices are not as effective if a conductive gel is not applied to the skin before using the Facial Toning Device.

Our Aloe Vera Gel can be used as a water-based conductive gel with the Pure Derma Facial Toning Device.

A free 30ml Pure Aloe Vera Conductive Gel is included with each EMS microcurrent device purchase.

Product Information and Contraindications

Charging the EMS Microcurrent Facial Toning Device

The microcurrent toning device is USB rechargeable and displays a charging light. There is a low battery indicator which illuminates approximately 10 minutes before the battery is drained.

Please Do NOT charge your microcurrent toning device after every use or leave your microcurrent toning device on the charger all the time - this may affect long term battery life.

Cleaning the EMS Microcurrent Facial Toning Device

Always clean the device thoroughly after each use with a slightly damp soft cloth. Do not use alcohol, detergents, or harsh cleaning chemicals.

Do not immerse in water, the device is not waterproof.

After cleaning store it in its box or other safe place.

Important

Do not use if you have a history of epilepsy or seizures.

Do not use if you have a body worn medical device.

Do not use if you have an electronic implant device such as a defibrillator, neurostimulator, pacemaker, or ECG Monitor.

Do not use if you have had recent facial surgery or other surgical procedures, without approval from your doctor.

Do not use if you have any skin sensitisation issues or sensitive skin concerns.

Do not use if you are pregnant.

Not for use for anyone under the age of 18, keep the device out of the reach of children.

Botox, Fillers and Microcurrent Technology - if you have had Botox or Filler injections of any kind, you should wait at least two weeks before using microcurrent therapy to ensure you don’t have any issues or sensitivities with areas of your skin that have been injected. It is always best to obtain specialist advice from your aesthetics technician with regards the treatment you have had and when to use the microcurrent toning device.   

It is not recommend to use retinol the day before using the microcurrent device. This is because the retinol can remain in the skin and when microcurrent is performed over the skin it may push the Retinol in deeper. Retinol can cause irritation of the skin when it is driven deeper into the skin.

It is also important not to use any type of chemical peel before a microcurrent treatment.

Some people may experience twitching of the muscle which is a sign that you need to turn down the intensity and may need to reduce the duration and frequency of use. 

You may experience a metallic taste in the mouth after using microcurrent technology, this is because the current has an impact on the enzymes in saliva and is nothing to worry about. Any metallic taste is due to the current coming from the microcurrent probes and flowing to where our taste receptors are in the mouth . Nothing is going wrong with your dental work or any fillings.

Product Specification

Frequency: 8.3HZ (Low Frequency)

EMS output current:

Level 1: <0.1uA

Level 2: <0.2uA

Level 3: <0.4uA

EMS output voltage:

Level 1: <31.2V

Level 2: <50.0V

Level 3: <82.4V

Includes 1 Year Warranty